Model RMD-200-5-PC
Software for Remote Motor Drive
With the Model RMD-200-PC software, it is now possible to control your RMD-200-X remote motor drive from your PC or MAC from outside of the treatment room, thus adding convenience and significant time saving to your monthly routine. Installation of the software is easy. Just copy the .exe file and go. The hand crank is reinstalled on the motor shaft, retaining the original manual reference point positioning and mechanical counter readout functions.
The PC or MAC computer along with the CNMC motion control software serves as the control/display unit. It is connected to the drive motor by a 15 meter cable via an interface unit for complete control of chamber depth from the accelerator console. The programmability of the softwre allows the user to preset the depth increments or the entire measurement routine. The computer display indicates the depth position, with 0.01cm accuracy assured by optical encoder feedback.
Model RMD-200-1-PC may be specified for adaptation to the existing MEDTEC MT-100 and MT-150 water phantoms.
Model RMD-200-3-PC may be specified for adaptation to the existing CNMC WP-300 and WP-380 water phantoms.
Model RMD-200-5-PC may be specified for adaptation to the existing CNMC WP-3040 and WP-3840 water phantoms.